We sell the sewage treatment machines with the following specifications:

Rich experiences have gained from the stone (marble) industry for filter presses. Now take the configuration of 20 pieces 1000 mm filter plates as the example for introduction.(Note: Adjust the sizes and quantities of the filter plates according to the actual sludger amount so as to satisfy various demands).
I. Type: XMK1000-20-U
II.Technical parameters:
1. Filtration area: 30M 2
2. Dimensions of filter plates: 1000*1000 mm (feeding from the middle top)
Effective volume: 0.67M 3
4. Amount of filter plates: 20 pieces (including one piece respectively for both ends)
5. Dimensions of Equipment: 6580 (approximately) *1420*1500 MM (length * width * height, filter plates space 100mm)
6. Total weight: 5000kg
Filtration pressure ≤0.7Mpa
8 Framework made of steel plates by welding, hydraulic pressing filter plates with maximum pressure 31.5 M pa. Pressure kept by pressure gauge with electric contact. Motor 4 kw /380V/ 50 HZ.
9. Automatic pull plate type (once quick-open type, cylinder with actual displacement 2,200mm).
10. The filter plates are made of reinforced polypropylene with thickness of 78 mm. The thickness of filter cake is 45 mm. Double clear-sighted output flows.
11. The hydraulic station has double oil pump design, which can save the non-cutting time.
12. For the convenience of filter cake falling-off, design motor-driven handle vibrating filter plates. Chain/rail SUS304.
13. Control system: the electric control system is made up of the electric control box and testing instruments. Mitsubish brand PLC. Ohmlong / Schneider brand electronic components. The following functions are controlled from control panel:
         1. Filter plates pressing/ loosing
         2. Test the liquid level of the sewage.If the liquid level of the sewage reaches the upper limit of 1# instrument (level meter), the feeding pump
starts automatically; if it reaches the lower limit, the feeding pump stops automatically. The upper and lower limits of 1# level meter can be adjusted
as required.
         3. Test the liquid level of the sewage.If the liquid level of the filtrate in the tank reaches the lower limit of 2# level meter,
the filtration stops automatically. The upper and lower limits of 2# level meter can be adjusted as required
14. Filter cloth: 30 pieces of PP monofil filter cloths.
15. Feeding pump: it is recommended to use abrasion resistance centrifugal pump. Flow: 80M3/Hr, Lift: 50M.

Brief introduction of the sewage treatment facilities of environmental and water resources protection

A. In order to fulfill the urban environmental protection project, the Company also provides the sewage treatment facilities. All of the facilities are imported from Germany, Israel and Taiwan. The facilities have long service lifetimes and can withstand around-the–clock operations with minimum maintenances.
B. Our IK series sludge dewaterers introduce the technologies from Japan and are resold to Japan and Southeast Asia. The operation desk is used with “directional pilomotor fiber” filter belt. It is the model of most reliable, effective and special sludge dewatering. The surface of the filter belt has static electricity down for the convenience of sludge flaking off. It is easy to be cleaned with minimum water. The operation desk is computer laser cut once molding and has service lifetime over 15-20 years.
C. Fulfill the urban environmental protection project so as to improve the hygienic status of the city.Carry out diversion of course and treatment for the untreated city planning sewage and household sewage before discharging into the rivers so as to improve the water quality and the environment of the residential and entertainment quarters. This includes the sewage collection, treatment and discharge.